PinFT: Miniature 5-Axis Force/Torque Sensor Embeddable to Tweezer-like Tool

Practical Tips

Practical tips and how-to guidance will be added by our editorial team.

中文解读

中文解读待补充：本站将优先为睡眠改善、失眠治疗、助眠方法等高价值文章补充中文说明。

Article Summary

We present PinFT, a miniature five-axis capacitive force/torque sensor designed for direct tip-level integration into tweezer-like tools. The sensor employs a compact three-PCB stack with segmented plated through-hole electrodes and a silicone elastomer dielectric, enabling five-degree-of-freedom force and torque sensing ($F_x$, $F_y$, $F_z$, $T_x$, $T_y$) through displacement of a central 2\,mm-diameter stainless steel pin. The fabricated prototype was calibrated using a higher-order polynomial mapping, yielding mean absolute errors of approximately 0.23\,N for forces and 2.5\,mN$\cdot$m for torques, with coefficients of determination ($R^2$) exceeding 0.97 across all axes. To demonstrate practical utility, a 3D-printed tweezer integrating PinFT sensors at both tips was mounted on a parallel-jaw gripper and evaluated across three representative manipulation tasks: grasping a sub-millimeter SMD capacitor, pulling a simulated hair from a silicone substrate, and tearing a compliant silicone specimen. In all cases, per-tip force sensing reliably captured characteristic force signatures that distinguish successful manipulation from failure events -- including slip and object ejection -- using gradient-based features derived from internal grasp force and net interaction force. These results demonstrate that direct, per-tip force sensing enables standard parallel-jaw grippers to monitor and interpret fine manipulation tasks performed through a handheld tweezer.

Sources & References

• Original source
• Full article (PDF)

Comments