Impedance Control of Ship-Borne Manipulators via Optimization-based Task-Space Inverse Dynamics

Practical Tips

Practical tips and how-to guidance will be added by our editorial team.

中文解读

中文解读待补充：本站将优先为睡眠改善、失眠治疗、助眠方法等高价值文章补充中文说明。

Article Summary

Ship-borne manipulators operating in maritime environments are subject to stochastic wave-induced base motions that introduce kinematic disturbances and dynamic coupling, degrading trajectory tracking accuracy and complicating safe, contact-rich manipulation. This paper proposes a torque-level optimization-based control framework that integrates high-precision trajectory tracking with task-space impedance for ship-borne manipulators. The controller is formulated using task-space inverse dynamics (TSID) and solved via quadratic programming to explicitly compensate for the dynamic coupling introduced by base motion. To enable accurate feedforward compensation, an error-state Kalman filter (ESKF) is developed to estimate the base state by fusing inertial measurements with end-effector pose feedback. The framework is validated in simulation and real-world experiments using a 7-DOF manipulator mounted on a 6-DOF Stewart platform. The proposed method reduces real-world end-effector position tracking error by over 25.7% compared with the best baseline. Furthermore, the controller enables dynamic peg-in-hole insertion with 1~mm clearance under base motion, increasing the success rate while reducing average contact forces by 45%, demonstrating precise and compliant manipulation in contact-rich environments.

Sources & References

• Original source
• Full article (PDF)

Comments