ALFRED: Requirement-driven development of an open-source mobile manipulator for long-term plant monitoring

Practical Tips

Practical tips and how-to guidance will be added by our editorial team.

中文解读

中文解读待补充：本站将优先为睡眠改善、失眠治疗、助眠方法等高价值文章补充中文说明。

Article Summary

Tracking seasonal change in crops and forests requires observing the same plants repeatedly. Ground robots can do this at close range, and a manipulator gives their sensors more viewpoints. Yet the robots behind long-term field datasets are rarely released with their design files, and how a robot's own structure limits arm reach and occludes its sensors is seldom compared between builds. We present ALFRED, an open-source mobile manipulator built from commercially available components. It carries a six-degree-of-freedom arm, LiDAR, RGB-D cameras, RTK GNSS and an IMU on an Ackermann-steered base, all mounted on a reconfigurable aluminium strut frame, and runs containerised ROS software. It was developed through four builds against six requirements for repeated outdoor deployment: durability, modularity, repairability, sensing reach, endurance and reproducibility. Model-based analysis of the last three builds shows the usable share of the arm's reachable poses rising from 34.0% to 60.0% and then 66.1%, and ray casting shows that only the final build keeps the frame-mounted LiDAR's horizontal view clear both forwards and backwards. ALFRED completed a year of monthly forest surveys (528 traversals) without missing a scheduled collection. This was despite battery degradation, reconfiguration for another researcher's study, and the parallel development of ALFRED 2.0 for autonomous crop-row operation, with each switch between builds taking about six hours. The deployment also showed that mechanical modularity is only as dependable as the robot description that tracks it.

Sources & References

• Original source
• Full article (PDF)

Comments